Brother International Entrepreneur PR-650 Users Manual - English - Page 119

Creating an Appliqué Piece Appliqué pieces can be created from the built-in patterns and patterns on embroidery cards. This is convenient for fabrics that cannot be embroidered or when you wish to attach an appliqué to a garment. Creating an appliqué piece The following pattern will be used to create an appliqué piece. Use and to specify the distance 2 between the pattern and the appliqué outline. Note ● Felt or denim fabrics are recommended to make the appliqué piece. Depending on the pattern and fabric used, lighter weight fabrics may cause the stitching to appear smaller. ● For best results, be sure to use stabilizer material for embroidering. ● Select a frame that matches the pattern size. Frame options are displayed on the LCD screen. ● It is recommended to finish combining 4 and editing the pattern before selecting the appliqué setting. If the pattern is edited after selecting the basting setting, the basting and pattern may become misaligned, and the basting under the Memo ● The setting remains selected even if the machine is turned off. pattern may be difficult to remove after embroidering is complete. ● Since an outline is added, the pattern for an appliqué piece (when the appliqué Touch to return to the embroidering 3 settings screen. setting is selected) will be larger than the original pattern. First, adjust the size and position of the pattern as shown below. 1 Embroidering area 2 Approx. 10 mm 3 Pattern size Touch , and then display page 2/5 1 of the settings screen. Creating an Appliqué Piece 117