Brother International FAX 275 Service Manual - Page 136
Error, codes, shown, MACHINE, ERROR, message
UPC - 012502564546
View all Brother International FAX 275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
[ 2 ] Error codes shown in the "MACHINE ERROR XX" message Error Code xx (Hex.) ( 87 ( 89 8A ( 8B ( Al ( A2 ( A3 ( A4 ( A5 ( A6 ( A7 ( A8 ( A9 ( AB ( AC ( B9 ( BE ( BF ( D5 ( D6 ( E4 E6 ( E8 F3 ( F5 ( F6 ( F7 Error factor Fails to complete the sequence of recording operation. ) Cutter jam. ) Wrong or weak contact of the recording head connectors. Recording head overheat. ) Recording paper cover opened. ) Document too long to scan. ) Document not detected by the document rear sensor. ) 50% or more faulty of white level data. ) * Faulty operation of DMAO during scanning. ) Faulty operation of DMA1 during scanning. ) One-line feeding time-out error. ) One-line scanning time-out error. ) Abnormal scanning reference voltage. ) Document feed-in amount measuring error. ) * Less than 50% faulty of white level data. ) * Light emission intensity error of the LED array. ) Abnormal clamp PW11/1 value ) Light emission intensity error of the LED array at the setting time of initial values. ) * The MODEM fails to complete the command transmission sequence. ) No MODEM interrupt for 60 seconds. ) Out of recording paper. ) Write error in E2PROM. Data scanning error during transmission. ) Voice message recording or playing-back not started. EOL not found in page memory transmission mode. ) PC interface error. ) Optional handy scanner interface error. ) Error codes in parentheses do not appear in the "MACHINE ERROR XX", since those errors are displayed as messages described in "[ 1 ] Error messages on the LCD." You can display those error codes in the maintenance mode (Function code 82). Those error codes appear in the communications error list if an equipment error occurs during communications. Refer to Section 1.2, (13). * Those codes marked with an asterisk can appear only in the maintenance mode.