Brother International FAX 275 Service Manual - Page 15
Receiving, Mechanism, Feeding, recording, paper, printing
UPC - 012502564546
View all Brother International FAX 275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2.2 Receiving Mechanism (Feeding recording paper and printing data) The receiving mechanism consists of the recording paper roll holder, anti-curl system (ACS) plate, platen, thermal recording head, automatic cutter, and sensors. (For details about the sensors, refer to Section 2.4.) The recording paper is routed on the ACS plate to the recording head which prints onto the heat-sensitive recording paper pressed by the platen according to received image signals. The printed paper is further fed through the cutter chute and cut by the automatic cutter page by page. For the drive power source, refer to Section 2.3. 0 Recording paper roll ACS plate Cutter's upper blade 0 . (Front) Cutter's lower blade Platen Recording head 2.2.1 Anti-curl system (ACS) The ACS eliminates curl peculiar to rolled recording paper by curving the paper towards the opposite side of the curl with the ACS plate. 2.2.2 Automatic cutter The automatic paper cutter consists of an upper blade (rotary) and a lower blade (stationary). As the upper blade rotates around the left end hub, the recording paper will be cut. Upon completion of cutting, the upper blade returns to its home position which is detected by the cutter HP sensor. 2.2.3 Recorder The recorder, which is incorporated in the middle of the machine, consists of the recording head unit, coil spring, and platen. It prints according to received image signals.