Brother International FAX 275 Service Manual - Page 90
detection, Selectors, through, detection
![]() |
UPC - 012502564546
View all Brother International FAX 275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Selector No. 1 I 3 4 5 6 7 8 WSW05 (1st dial tone and busy tone detection) Function 1st dial tone detection Max. pause time allowable for remote ID code detection Busy tone detection in automatic sending mode Busy tone detection in automatic receiving mode Not used. Setting and Specifications No. 1 2 3 0 0 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 : 3.5 sec. WAIT : 7.0 sec. WAIT : 10.5 sec. WAIT : 14.0 sec. WAIT : 17.5 sec. WAIT : 21.0 sec. WAIT : 24.5 sec. WAIT : Detection (Without WAIT) 0 : 2 seconds 1: 1 second No. 5 6 00 : 01 : 10 : 11 : No detection Detection only after dialing No detection Detection before and after dialing 0 : Yes 1: No NOTE: Selectors 5 through 7 are not applicable in those countries where no busy tone detection is supported, e.g., China. • Selectors 1 through 3: 1st dial tone detection These selectors activate or deactivate the 1st dial tone detection function which detects the 1st dial tone issued from the PSTN when a line is connected to the PSTN. Setting all of these selectors to "1" activates the dial tone detection function so that the equipment starts dialing upon detection of a dial tone when a line is connected. (However, in those countries which support no dial tone detection function, e.g., in the U.S.A., setting these selectors to "1" makes the equipment start dialing after a WAIT of 3.5 seconds.) For the detecting conditions of the 1st dial tone, refer to WSW07 and WSW08. Other setting combinations deactivate the dial tone detection function so that the equipment starts dialing after the specified WAIT (3.5, 7.0, 10.5, 14.0, 17.5, 21.0, or 24.5 seconds) without detection of a dial tone when a line is connected to the PSTN. V - 16
![](/manual_guide/products/brother-international-fax-275-service-manual-f48d3e5/90.png)