Brother International FAX 275 Service Manual - Page 48
separate, control, panel, unlock, connector, disconnect, microphone, harness, panel., remove, clamps
UPC - 012502564546
View all Brother International FAX 275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
(7) To separate the FPC key from the control panel PCB, unlock the FPC key connector and disconnect the FPC key. (8) For the FAX355MC/FAX375MC/FAX-525DT/FAX-525MC: Take out the microphone* and its harness* from the control panel. Bosses O uu 0 Main-mic harness* Guides Control panel * Provided on the FAX355MC/FAX375MC/ FAX-525DT/FAX-525MC. (9) To take out the LCD, remove the control panel PCB and the FPC key in step (6). Pull up the clamps with your fingers and take out the LCD to the front, as shown below. Clamp LCD (Rear) Clamp ■ Reassembling Notes • When installing the LCD, take care not to scratch or damage the cover sheet. Replace it if scratched or damaged. • A new LCD is covered with a protection sheet. Before installing it, remove the protection sheet.