Brother International FAX 275 Service Manual - Page 232

48 CHAPTER EIGHT See Storing One Touch Dial Numbers p. 43 F One Touch Dialing 1 Pick up the handset-OR-Press Hook 2 When you hear a dial tone, press the One Touch key of the location you want to call. 3 If you pressed Hook to dial the call, pick up the handset when the other party answers. (The speaker works only one way; the other party won't be able to hear you unless you pickup the handset.) 4 To hang up a voice call, replace the handset. If you try to use a One Touch location with no number stored in it, you hear a warning sound, and screen displays NOT REGISTERED. The display returns to normal after 2 seconds. If you are sending a fax, press [Start after pressing the One Touch key. If you picked up the handset, press [Start when the receiving fax machine answers with fax tones. See Storing Speed Dial Numbers p. 45 Speed Dialing 1 Pick up the handset-OR-Press [Hook 2 When you hear a dial tone, press Speed Dial], then press the two-digit Speed Dial number. 3 If you pressed Hook to dial the call, pick up the handset when the other party answers. (The speaker works only one way; the other party won't be able to hear you unless you pickup the handset.) 4 To hang up, replace the handset. If you are sending a fax, press (Start] after entering the Speed Dial number. If you picked up the handset, press Start when the receiving fax machine answers with fax tones. Hold 1 Press Hold/Caller ID to put a call on Hold. 2 You can put down the handset without disconnecting the call. 3 Pick up the fax machine handset to release the call from Hold. Picking up an extension handset will not release the call from Hold.