Brother International FAX 275 Service Manual - Page 47

1.5 Recording Paper Cover, Panel Rear Cover, Control Panel and Microphone* (*FAX355MC/FAX375MC/FAX-525DT/FAX-525MC) (1) Place the control panel ASSY upside down. (2) Turn the panel lock arm until the cutout provided in it becomes aligned with the boss of the arm support, then pull it out to the left. (3) Remove the two screws "a" from the recording paper cover and lift up the rear edge of the cover. (4) Remove the ADF parts (ADF film, separator and leaf spring), using the spring hook and a flat screwdriver. Once removed, they will become unusable and new parts should have to be put back in. (5) Remove the four screws "b" from the panel rear cover, then unhook the latches "L" and lift up the cover. (6) For the FAX355MC/FAX375MC/FAX-525DT/FAX-525MC: Remove the screw "c" from the control panel PCB. Unlock the LCD cable connector and disconnect the LCD flat cable to take out the control panel PCB and the FPC key. "a" Recording paper cover Arm support "a" Panel lock arm ADF film ADF parts Separator "b" Leaf spring "b" Main-panel harness Latches "L" 0 0 •o 0 Panel rear cover FPC key FPC key connector Control panel PCB LCD cable connector Microphone* Control panel q:D LCD flat cable LCD * Provided on the FAX355MC/ FAX375MC/FAX-525DT/FAX525MC.