Brother International FAX 275 Service Manual - Page 53
White, Pressure, Roller
UPC - 012502564546
View all Brother International FAX 275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
1.7 White Pressure Roller and CIS Unit (1) Turn the bushing of the white pressure roller clockwise approx. 90° and pull it out to the right. (2) Lift up the left end of the white pressure roller and push it to the right. Bushing White pressure roller (Front) CIS unit Bushing (3) Unhook the two springs, using the spring hook. (4) Slightly lift up the CIS unit and disconnect the CIS harness. The CIS support also comes off. CIS unit CIS harness CIS holder F- 0 CIS support Spring Scanner frame ASSY cs7 ■ Reassembling Notes • Before putting the white pressure roller back into place, wipe it with an alcohol-dampened cloth. • When replacing the CIS unit, remove the CIS holders (secured with screws) from the old CIS unit and install them to a new CIS unit. IV - 17