Brother International FAX 275 Service Manual - Page 212

28 CHAPTER FOUR Setting Volume Amplify Please carefully read "Setting the Handset Volume" before you do the following steps: I Press Function 5 C 1-1 • 2- Press ) or Ow- to select VOL AMPLIFY:OFF? if none of the users are hearing-impaired and go to Step 4-OR-If some or all of the users are hearing-impaired, select VOL AMPLIFY:ON?. C 3 Press or No- to select PERMANENT? if all the users are hearing-impaired-OR-Select TEMPORARY? if only some of the users are hearing-impaired. 4 Press 5 Press Stop to exit. Setting the Speaker Volume You can adjust the speaker volume when your fax machine is onhook (after you pressed Hook), by selecting a speaker volume level. Press L ► or H to adjust the volume level. The display shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again. Setting the Ring Volume You can adjust the ring volume when your fax machine is idle. You can select a ring volume level or press until the ring is off. Press IL or H to adjust the volume level. With each key press, the fax machine rings so you can hear the current setting and the display shows the setting you are choosing. Each key press changes the volume to the next setting. The new setting will remain until you change it again. Memory Storage In the event of a power failure, all settings in the INITIAL SETUP, SETUP RECEIVE and SET AUTO DIAL functions are stored permanently. You may have to reset the date and time.