Brother International MFC 8870DW Quick Setup Guide - English - Page 49
Authentication with WPA-PSK TKIP or AES, No Authentication with WEP Encryption
UPC - 012502615101
View all Brother International MFC 8870DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Installing the Driver & Software Macintosh® 2 Plug in the power cord and turn on the machine. If your access point is set to not broadcast the SSID you will have to manually add the SSID name. Go to step 5. 5 Select using or and press OK. Go to step 6. 22. Setup WLAN SSID Improper Setup If you have previously configured the wireless settings of the machine you must reset the network (LAN) settings before you can configure the wireless settings again. Press Menu, 6, 2, 4 (or Menu, 6, 0) and then press 1 to accept the change. 3 On your machine, press Menu, 6, 2, 2, 1. 22. Setup WLAN WLAN Enable? a On b Off Select ab & OK Press or to choose On (or Off), then press OK. The wired network interface will become inactive with this setting. 4 The machine will search for your network and display a list of available SSIDs. You should see the SSID you wrote down earlier. If the machine finds more than one network use the or keys to choose your network, then press OK. Go to step 8. 22. Setup WLAN SSID a salesgroup b ABCgroup Select ab & OK Note It will take a few tens of seconds to display a list of available SSIDs. Select ab & OK 6 Enter a new SSID. For information how to type text, see "Entering Text" in Chapter D of the User's Guide. 22. Setup WLAN SSID: Enter & OK key 7 Press or to choose Infrastructure, then press OK. 8 Use the , and OK keys to choose one of the options below: If your network is configured for Authentication and Encryption you must match the settings used for your network. No Authentication or Encryption: Choose Open system, press OK then choose None for Encryption Type and press OK. Then press or to choose 1.Yes and press OK to apply your settings. Go to step 12. No Authentication with WEP Encryption: Choose Open system, press OK then use the or to choose WEP for the Encryption Type and press OK. Go to step 9. Authentication with WEP Encryption: Choose Shared Key, press OK. Go to step 9. Authentication with WPA-PSK (TKIP or AES Encryption): Choose WPA/WPA2-PSK, press OK. Go to step 10. Authentication with LEAP: Choose LEAP, press OK. Go to step 11. Macintosh® Wireless Network 47