Brother International MFC 8870DW Quick Setup Guide - English - Page 57
How to set the machine’s network settings to wireless LAN or wired LAN, For wireless LAN
UPC - 012502615101
View all Brother International MFC 8870DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
For Network Users How to set the machine's network settings to wireless LAN or wired LAN To connect your Brother machine to a wireless or wired network you must configure the machine from the machine's control panel for the network type you are using. For wireless LAN On your machine, press Menu, 6, 2, 5 then press or to choose On, and then press OK. For wired LAN On your machine, press Menu, 6, 1, 4 then press or to choose On, and then press OK. Note In case that you choose On for both wireless LAN and wired LAN, if the network cable is connected to the machine, the wired network interface will be active. If the cable is not connected to the machine, the wireless network interface will be active. Restoring the network settings to factory default To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below. 1 Make sure the machine is not operating, then disconnect all the cables from the machine (except power cable). 2 Press Menu, 6, 0. 3 Press 1 to select Reset. 4 Press 1 to select Yes. 5 The machine will restart, re-connect cables once this is complete. 55