Canon BJ-200EX User Manual - Page 99
If problem persists, go back to step 5 above and, If the image prints correctly with the Print Manger
View all Canon BJ-200EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Printer does not print from Windows (but does print from MS-DOS) Output is not as expected Extra characters appear on page Your computer is having Follow these steps: a problem communicating with the printer. 1. Select the Main group from the Program Manager. 2. Double Click on the Control Panel. 3. Double Click on the Printer icon. 4. Select the BJ-200ex. 5. Click on Connect. 6. Click on the box next to Fast Printing Direct to Port to remove the X. 7. Click on OK. 8. Click on Close. 9. Close the Control Panel. 10. Try your print operation again. If problem persists, go back to step 5 (above) and change the connection from LPT1 to LPT1.DOS. Printer driver may not be Make sure you have selected the Canon BJ-200ex setting in correct. the Printer dialog box or from the printer setting for your particular application. Print Manager may be Disable the Print Manager. causing problems. If the image prints correctly with the Print Manger disabled, but you want to use the Print Manger to print in Windows, try the following: 1. Minimize all the current Windows applications. 2. Click on Print Manager; a dialog box appears. 3. Select END TASK. 4. Double Click on Program Manger. 5. Select WINDOW 6. Select MAIN 7. Double Click on Control Panel. 8. Double Click on Printers 9. Place and X in the box next to Print Manager. 10. Select the Canon BJ-200ex 11. Select CONNECT 12. Change the value in Device Time outs from 15 to 30 seconds. 13. Change the value in Transmission Retry from 45 to 90 seconds. Fonts do not print Bitmapped fonts designed Make sure you installed an outline font manager, such as as smoothly for dot matrix printers do Adobe Type Manager or Bitstream Facelift, or that you are rounded not print smoothly choosing a TrueType font. characters rounded characters when used with high resolution printers like the BJ- 200ex. Certain MS fonts, such as Choose another font. MS Serif, will print jagged. Cannot print file Software may not be Check that all software is correctly configured for the sent from remote configured correctly. network environment. For example, with a Novell network computer you must include the Capture statement. Refer to the user's manual supplied with your networking software for more information. Large gaps appear Check that the video Choose the Main group icon in the Program Manger and open