Canon MP370 MultiPASS MP370/360 User's Guide - Page 90
Setting The Power Save Timer, POWER SAVE TIMER
UPC - 013803037111
View all Canon MP370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Setting The Power Save Timer Power Save mode is the mode in which the scanning lamp is shut off. You can specify the length of time until the machine enters the Power Save mode by using the Power Save Timer setting. If you perform an operation immediately after recovering from Power Save mode, the image may not be correctly read by the machine. If you use the machine frequently, we recommend that you set the Power Save Timer to or . IMPORTANT • After recovering from Power Save mode, wait at least one minute before scanning or copying. • The default setting is . Follow this procedure: 1 Press [Additional Functions]. 2 Use [W] or [X] to select . USER DATA 7.POWER SAVE TIMER 3 Press [Set]. Ex: POWER SAVE TIMER 1 HOUR 4 Use [W] or [X] to select the time to switch the machine to Power Save mode. - : Switches the machine to Power Save mode if any key on the operation panel is not pressed for one hour. - : Switches the machine to Power Save mode if any key on the operation panel is not pressed for four hours. - : Switches the machine to Power Save mode if any key on the operation panel is not pressed for eight hours. 5 Press [Set]. 88 Maintenance Chapter 10