Canon REALiS LCOS WUX5800 WUX7500 WUX6700 WUX5800 Users Manual - Page 164

Menu Description Power supply settings > [System settings] > [Power supply settings] Specify how power is managed at startup, in standby, and when no signal is supplied. Standby power setting Specify network function operating status in standby mode. Option Function Normal All network functions are available when network functions are enabled, including the web screen and PJLink. Low-power All functions are disabled except for some wired LAN functions (such as operations over a network). • [Standby power setting] is set to [Normal] and cannot be changed when scheduling is enabled (P167). • [Standby power setting] is set to [Normal] and cannot be changed when wireless LAN is enabled (P175). • [Standby power setting] is set to [Normal] and cannot be changed when IPsec function is enabled (P205). Power management mode Specify to turn the light source off or enter standby if there is no input signal. This feature automatically turns off the light source or power after a certain period if the remote control or projector is not operated. Option Function Disabled Disable power management mode. Light source off Only turns the light source off. Standby Turns the projector off and puts it in standby. • Projection resumes when the same input signal is restored, when the remote control or projector is operated, or when user commands are sent to turn the projector on. • After the projector enters standby, restoring projection requires the same steps as when turning the projector on normally. • When [Disabled] is selected, [Direct power on] is not available. 162