Canon REALiS LCOS WUX5800 WUX7500 WUX6700 WUX5800 Users Manual - Page 198
Explanation, Factory default setting, Prefix length]
![]() |
View all Canon REALiS LCOS WUX5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Projector Web Screen Menu Item MAC address IPv4 DHCP address IP address IPv6 address Subnet mask Default gateway IPv6 Autoconfiguration IP address Prefix length Default gateway Explanation Shows the projector's wired MAC address. Select whether to turn the DHCP function on or off for wired LAN (IPv4). The following settings cannot be configured manually when this setting is [ON], because the IP address is acquired from the DHCP server. [IP address] [Subnet mask] [Default gateway] Enter the projector's wired LAN (IPv4) IP address in 1-byte numbers. Enter the wired LAN (IPv4) subnet mask in 1-byte numbers. Enter the wired LAN (IPv4) default gateway address in 1-byte numbers. Specify on or off for the IPv6 function of the wired LAN (IPv6). Choosing [OFF] will prevent you from configuring the following settings. [Autoconfiguration] [IP address] [Prefix length] [Default gateway] Select on or off for the auto setting function of the wired LAN (IPv6). Choosing [ON] will prevent you from configuring the following settings. [IP address] [Prefix length] [Default gateway] Enter the wired LAN (IPv6) address in 1-byte numbers or letters between A and F. Enter the wired LAN (IPv6) prefix length in 1-byte numbers. Enter the wired LAN (IPv6) default gateway address in 1-byte numbers or letters between A and F. Factory default setting The projector's wired MAC address OFF 192.168.254.254 255.255.255.0 0.0.0.0 OFF ON If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to the network. If the network subnet mask was changed, select [Subnet mask] in the above screen and set the new subnet mask. 196
![](/manual_guide/products/canon-realis-lcos-wux5800-wux7500-wux6700-wux5800-users-manual-961d166/198.png)