Canon REALiS LCOS WUX5800 WUX7500 WUX6700 WUX5800 Users Manual - Page 74
Adjusting Peripheral Focus, Bringing Image Edges into Focus
View all Canon REALiS LCOS WUX5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Installation Procedure Resetting the Position During screen position adjustment, press and hold the LENS-SHIFT button on the remote control or the LENS button on the projector to display the [Lens shift reset] window. The selections for the lens currently used are displayed. Use the pointer buttons to select one of them, then press the OK button. Lens unit type RS-SL01ST RS-SL02LZ RS-SL04UL RS-SL05WZ RS-SL03WF RS-SL06UW Available items 50%: Up 50%, left/right 0% 0%: Up/down/left/right 0% 0%: Up/down/left/right 0% • After resetting, the lens may be slightly misaligned from your selected position. • For precise positioning, use the lens shift function to fine-tune the position. Adjusting Peripheral Focus This feature enables focus adjustment around the edges of the screen. • Use marginal focus adjustment for curved screens, such as domes. • Use marginal focus adjustment to bring images on flat screens into focus if image edges remain warped after you adjust the overall focus. • The marginal focus feature is not available depending on the type of lens installed. • [Marginal focus] must be set to [On] in advance (P147). ■ Bringing Image Edges into Focus To adjust peripheral focus, press the FOCUS button on the remote control or the LENS button on the projector. 1 Press the FOCUS button on the remote control twice to display the marginal focus adjustment window. Remote control Press twice. 72