Canon REALiS LCOS WUX5800 WUX7500 WUX6700 WUX5800 Users Manual - Page 53
Projecting a Test Pattern from the Menu, Specifying Power-Saving Settings, Lamp mode
View all Canon REALiS LCOS WUX5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Basic Guide Convenient Projection Features Convenient Projection Features Projecting a Test Pattern from the Menu Even without any input signals, the projector can project a test pattern. Test patterns can be projected during installation to check how the projector is installed. For details on projecting test patterns, see "Test pattern" (P152) or "Adjustment Using a Test Pattern" (P105). Specifying Power-Saving Settings Set power-saving settings as needed. The following four settings are available. For details, refer to the page describing each function. • Lamp mode (P141) Adjust lamp and fan power consumption in the image mode. • Standby power settings (P162) Conserves energy in standby mode by disabling some network functions. • Power management mode (P162) Automatically turns off the lamp or the power after a certain period if the projector is idle without an input signal. • Power management duration (P163) Specify the period after which the lamp or the projector should go off automatically if left idle without an input signal when [Power management mode] is set to [Light source off] or [Standby]. 51