Canon REALiS LCOS WUX5800 WUX7500 WUX6700 WUX5800 Users Manual - Page 167
Other settings, Password settings, To Cancel the Password
View all Canon REALiS LCOS WUX5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Menu Description Other settings > [System settings] > [Other settings] Register a password, set a password, reset counters for lamp or air filter, schedule operation, and access other settings and information. Menu Guide Menu Description Password settings Disables the projector unless the correct password is entered. Option Function Off The projector can be used even if no password is entered. On The projector cannot be used unless you enter your password. To Cancel the Password Cancellation on the Projector Turn off the projector and unplug the power plug. Hold down the MENU button on the side control and connect the power plug. Make sure to keep holding down the MENU button until a beep sounds. When the projector beeps, the password is canceled. (The entered password is also reset.) Cancellation on the Remote Control To forcibly cancel the password from the remote control, in standby state press the MENU button 3 times, then press the POWER button. • You cannot set [On] unless you have completed [Register password]. Once you set a password, the password entry screen appears at power-on. Enter a 4 digit password. Enter the password using the buttons or number buttons on the remote control. If the password is valid, the projection starts. If you enter a wrong password three times, the power will be turned off. • The projector also goes off after three minutes of inactivity on the password input screen. 165