Canon REALiS WX6000 Pro AV User Manual - Page 56
Starting Projection
View all Canon REALiS WX6000 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Starting Projection 1 Check the connection between the projector and the computer or AV equipment. (P52 - P55) 2 Connect the power cord and make sure that the [STAND BY] indicator is lit (red). Connect the ground terminal on the power plug to ground. Not doing so could result in an electric shock. Also the computer may suffer electromagnetic interference or be subject to poor TV and radio reception. • Fully insert the power cord plug into the socket. • After turning off the projector, wait at least 5 minutes before turning it on again. It may shorten the lamp life if you turn on the projector immediately after turning it off. • Unplug the power cord when not in use. 3 Press the POWER button. The [POWER] indicator flashes green, and then stops flashing and remains lit. Remote control Projector Remote control The countdown window is displayed for approximately 20 seconds, and then the projection is started. Press the OK or EXIT button (WX6000 / SX6000) to make the countdown window disappear. 56