Canon SELPHY DS810 DS810 Photo Printing Guide - Page 50

Printing Photographs Directly from a Digital Camera Photo Paper Plus Glossy. The following sizes and types of paper can be loaded in the printer by selecting options from Paper size and Paper type. "Paper size" setting 10×15 cm / 4"×6" "Paper type" setting Photo Fast Photo 5.4×8.6 cm / Credit Card Photo Paper loaded in printer Photo Paper Plus Glossy Photo Paper Plus Semi-gloss Glossy Photo Paper Photo Stickers* Photo Paper Pro Glossy Photo Paper Credit Card * Sticker media manufactured by Canon. Set Paper size to 10×15cm/4"×6" when printing stickers. „ About "Layout" and "Trimming" For Layout, when you have selected Default (selections based on the printer setting), the printer operates based on the Settings screen. Note When printing onto Photo Stickers (PS-101) (16-up), use the following settings. 1 Load the paper. 2 Select 10 × 15 cm/4" × 6" for the Paper size, and Photo for the Paper type. 3 Select N-up for Layout, then select 16. Some PictBridge compliant devices display the Layout option; 2-up, 4-up, 9-up, and 16-up. In this case always select 16-up. If there are no options on the PictBridge compliant device that correspond to 2-up, 4-up, 9-up, or 16-up, printing on stickers is not possible. By default, Off (No trimming) is selected for Trimming. „ About "Image optimize" When you have selected Default (selections based on the printer setting), the printer operates based on the Settings screen. If you use a Canon PictBridge-compliant device, you can select VIVID, NR, VIVID+NR, or Face. (Note that these options cannot be selected for some models.) Notes • When VIVID is selected, green and blue portions of photos are printed vividly. • When NR (Noise Reduction) is selected, noise in blue portions, such as the sky, and dark portions is removed. • When VIVID+NR is selected, functions of both VIVID and NR are performed. • When Face is selected, backlit images are corrected when printed. 48