Canon SELPHY DS810 DS810 Photo Printing Guide - Page 55
Performing Infrared Communication
View all Canon SELPHY DS810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Printing Photographs from a Wireless Communication Device Performing Infrared Communication You can print photos in your mobile phone or PDA. When printing through infrared communication, also refer to the manual of your mobile phone or PDA. 1 Turn on the printer. 2 Load the paper. See "Loading Paper" on page 20. 3 Set the print setting. See "Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone or a PDA" on page 51. 4 Start Infrared Communication. (1) Oppose the infrared port of the mobile phone or the PDA to that of the printer at a distance of less than 7.9 inch (20 cm). Note The effective angle of the Infrared Port of the printer is about 10° from the central axis in both vertical and horizontal directions. The allowable distance of communication with the printer depends on the mobile phone or the PDA you use. For this distance, refer to the manual of your mobile phone or PDA. Infrared Port of printer Less than 7.9 inch (20 cm) (Do not block with any obstacle.) Infrared Port Effective angle (in both vertical and horizontal direction): About 10° (2) Select the photo to print and send the data to the printer using the infrared communication function of the mobile phone or the PDA. Printing will start after receiving all data. 53