Canon iP4600 User Manual - Page 357
Cannot Print Properly with Automatic Duplex Printing, Alarm Lamp Flashes Orange
UPC - 013803093728
View all Canon iP4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 357 highlights
Message Appears on the Computer Screen Стр. 357 из 396 стр. Advanced Guide > Troubleshooting > Message Appears on the Computer Screen Message Appears on the Computer Screen Service Error 5100 Is Displayed Error Regarding Automatic Duplex Printing Is Displayed Error Regarding Automatic Print Head Alignment Is Displayed Writing Error/Output Error/Communication Error Error Number: 300 Is Displayed Error Number: 1700 Is Displayed Ink Info Number: 1600 Is Displayed Ink Info Number: 1683 Is Displayed Ink Info Number: 1688 Is Displayed Error Number: 1851 Is Displayed Error Number: 1856 Is Displayed Error Number: 2001 Is Displayed Error Number: 2002 Is Displayed Error Number: 2500 Is Displayed Other Error Messages Service Error 5100 Is Displayed Check: Is the movement of the Print Head Holder blocked? Cancel printing from your computer and turn off the printer. Then clear the jammed paper or protective material that is preventing the Print Head Holder from moving. Important Be careful not to touch the components inside the printer. The printer may not print out properly if you touch it. Turn the printer back on. If the problem is not resolved, contact your Canon service representative. Error Regarding Automatic Duplex Printing Is Displayed Check: See Cannot Print Properly with Automatic Duplex Printing and take the appropriate action. Error Regarding Automatic Print Head Alignment Is Displayed Check: See Eleven flashes: in Alarm Lamp Flashes Orange and take the appropriate action. Writing Error/Output Error/Communication Error Check 1: If the Power lamp is off, make sure that the power plug is plugged in, then turn the printer on. While the Power lamp is flashing green, the printer is initializing. Wait until the Power lamp stops flashing and remains lit green. Check 2: Make sure that the printer port is configured appropriately in the printer