Canon iP4600 User Manual - Page 49

Printing the Nozzle Check Pattern Стр. 49 из 396 стр. Advanced Guide Troubleshooting Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. You need to prepare: a sheet of A4 or Letter-sized plain paper Note If the Inner Cover is open, close it. If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the ink tank whose ink is low. See Replacing an Ink Tank. You can also print the nozzle check pattern from the printer itself using the RESUME/CANCEL button. 1. Make sure that the power is turned on and one or more sheets of A4 or Letter-sized plain paper are loaded in the Cassette. 2. Open the Paper Output Tray gently, and extend to open the Output Tray Extension. 3. Hold down the RESUME/CANCEL button until the Power lamp flashes green twice, and then release it immediately. The nozzle check pattern will be printed. Do not open the Top Cover while printing is in progress. Examine the pattern and take an appropriate action. See Examining the Nozzle Check Pattern. 1. Make sure that the power is turned on and one or more sheets of A4 or Letter-sized plain paper are loaded in the Cassette. 2. Open the Paper Output Tray gently, and extend to open the Output Tray Extension. 3. Open the printer properties dialog box. See Opening the Printer Properties Dialog Box (Windows) . 4. Print the nozzle check pattern. (1) Click the Maintenance tab. (2) Click Nozzle Check. (3) Confirm the displayed message and click Print Check Pattern. The nozzle check pattern will be printed. Do not open the Top Cover while printing is in progress.