Canon iP4600 User Manual - Page 72
Power - flashing lights
UPC - 013803093728
View all Canon iP4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Safety Precautions If irritation or discomfort occurs, obtain medical advice immediately. In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with skin, wash with soap and water immediately. If irritation to eyes or skin persists, obtain medical advice immediately. Do not shake Print Heads or ink tanks. Ink may spill out and stain clothing or the surrounding area. Never touch the electrical contacts on a Print Head after printing. The metal parts may be very hot and could cause burns. Do not throw ink tanks into fire. Do not attempt to disassemble or modify the Print Head and ink tanks. Do not handle the Print Head and ink tanks roughly such as applying them excessive pressure or dropping them. Do not rinse or wipe the Print Head and ink tanks. Стр. 72 из 396 стр. Once you have installed the Print Head and ink tanks, do not remove them unnecessarily. Note when you place the printer near other electrical appliances such as fluorescent lamps Place the printer at least 5.91 inches / 15 cm away from other electrical appliances such as fluorescent lamps. If the printer is placed closer to those, it may not be able to work properly due to fluorescent noises. When you turn off the power When you turn off the power, always press the Power button and be sure that the Power lamp (in green) has gone out. If you disconnect the power plug from the power outlet when the Power lamp lights or flashes, the Print Head cannot be protected and you may not be able to print later. Page top