Canon iP4600 User Manual - Page 361

Cannot Print Properly with Automatic Duplex Printing Стр. 361 из 396 стр. Advanced Guide > Troubleshooting > Cannot Print Properly with Automatic Duplex Printing Cannot Print Properly with Automatic Duplex Printing Check: Is the paper size or media type appropriate? Make sure that the actual size of the paper is suitable for automatic duplex printing. The sizes of media suitable for automatic duplex printing are A4, Letter, A5, and 5" x 7". Load paper of suitable size, then press the RESUME/CANCEL button on the printer. Make sure that the Page Size or Paper Size setting matches the actual size of the paper with a size suitable for automatic duplex printing. First, check the Page Size setting in the application software you are printing from. Then, check the Page Size setting on the Page Setup sheet in the printer properties dialog box (Windows) or the Paper Size on the Page Setup dialog box (Macintosh). Note Duplex printing may not be available depending on the version of the application software. Make sure that the type of loaded paper is suitable for automatic duplex printing on the Main sheet (Windows) or the Quality & Media sheet on the Print dialog box (Macintosh). To switch to manual duplex printing, follow the procedure below. Open the printer properties dialog box, clear the Automatic check box on the Page Setup sheet, and reprint. When performing manual duplex printing, note the following. If you are printing three or more pages of a document with manual duplex printing, one side of all sheets of paper will be printed first. Turn over the paper and reload the paper in the printer, and then the reverse side of all sheets of paper will be printed. Be careful not to change the order of paper in the stack. The procedure for reversing the paper varies depending on the staple side and printing orientation. Follow the on-screen instructions. Manual duplex printing is not available. Page top