Canon iP4600 User Manual - Page 47

Replacing Procedure Important You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in the correct position according to the label on the Print Head Holder. You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks. Стр. 47 из 396 стр. 6. Close the Top Cover. If you replaced the ink tank during printing, the printer resumes printing automatically. Note If the Alarm lamp still flashes orange after the Top Cover is closed, refer to the "Alarm Lamp Flashes Orange" in the " Troubleshooting " of the on-screen manual: Advanced Guide. When you start printing after replacing the ink tank, the printer starts cleaning the Print Head automatically. Do not perform any other operations until the printer completes the cleaning of the Print Head. The Power lamp flashes green during cleaning. If printed ruled lines are printed or the print head position is misaligned, adjust the print head position. See Aligning the Print Head. The printer may make operating noise when preparing for printing. Page top