Canon iP4600 User Manual - Page 45

Replacing Procedure 3. Replace the ink tank with the lamp flashing fast. Push the tab (A) and lift the ink tank to remove. Do no touch the Print Head Lock Lever (B). Стр. 45 из 396 стр. Important Handle the ink tank carefully to avoid staining of clothing or the surrounding area. Discard empty ink tank according to the local laws and regulations regarding disposal of consumables. Note Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one when replacing two or more ink tanks. For details on ink lamp flashing speed, see Checking the Ink Status. 4. Prepare the new ink tank. (1) Take the new ink tank out of its package, pull the orange tape ( ) in the direction of the arrow to peel off the tape, then remove the film ( ). Important Make sure that the film is completely removed from the air hole (C). If the air hole is blocked with the remaining film, ink may leak out or may not eject properly. (2) Hold the orange protective cap (D) as indicated in the figure below, then twist and remove it from the bottom of the ink tank. Remove the protective cap while holding it to prevent the ink from staining your fingers. Discard the protective cap once it is removed.