Canon iP4600 User Manual - Page 75

Tips on How to Use Your Printer Tip!: Check how to load the paper correctly! Is the paper loaded in the correct orientation? When loading paper in the Rear Tray or Cassette, make sure the orientation of paper. Стр. 75 из 396 стр. (A) (A) Rear Tray (B) Cassette To load paper in the Rear Tray, load paper with the printing side facing you. (B) To load paper in the Cassette, load paper with the printing side facing down. Is the paper curled? The curled paper causes paper jam. Flatten the curled paper, then reload it. Refer to the "Troubleshooting" in the on-screen manual: Advanced Guide. Tip!: After loading paper, be sure to specify the paper settings! After loading paper, be sure to select the loaded paper in Media Type of the printer driver. If the type of paper is not selected, you may not be able to get the satisfactory print result. See Printing. There are various types of paper: paper with special coating on the surface for printing photos with optimal quality and paper suitable for documents. Media Type of the printer driver has different settings for each type of paper in advance (such as using ink, ejecting ink, or distance from nozzles) so that you can print on each paper with the optimal image quality. You can print with different settings in Media Type suitable for each type of loaded paper. Use the RESUME/CANCEL button to cancel printing! Tip!: Never press the Power button! If you press the Power button while printing is in progress, the print data sent from the computer queues in the printer and you may not be able to continue to print. Press the RESUME/CANCEL button to cancel printing. Note If you cannot cancel printing by pressing the RESUME/CANCEL button while printing from a computer, open the printer properties dialog box to delete the unnecessary print jobs from the printer status monitor (Windows). How to maintain the optimal printing quality? The key to printing with the optimal printing quality is to prevent the Print Head from drying or clogging. Always follow the following steps for optimal printing quality. Follow the procedure below to unplug the power cord. 1 Press the Power button on the printer to turn it off. 2 Be sure that the Power lamp is not lit. 3 Unplug the power cord from the wall outlet, or turn off the extender cable connector.