Canon imageCLASS MF5950dw imageCLASS MF5960dn/MF5950dw Basic Operation Guide - Page 170

Main Specifications Machine Specifications Machine Specifications Type Personal Desktop 120 to 127 V, 60 Hz (Power requirements can Power Supply vary by country. They depend on where you purchased the product.) Maximum: 1,100 W or less Average consumption during standby mode: Power Consumption Approx. 9 W Average consumption during sleep mode: Approx. 2.3 W Approx. 3.0 W (by Wireless Connections) 11 seconds or less* (Temperature: 68 °F (20 °C), humidity: 65% RH ; from when the machine is turned ON Warm-up Time using the main power switch to when the standby screen is displayed) * W arm-up time may vary depending on the conditions of the installation environment. Weight Main unit (the toner cartridge included): Approx. 42.1 lb (19.1 kg) • In the normal state 15 3/8" x 18 5/8" x 17" Dimensions (390 mm x 473 mm x 431 mm) (W x L x H) • When the optional drawer is installed 15 3/8" x 18 5/8" x 22 3/8" (390 mm x 473 mm x 569 mm) • In the normal state 23 1/4" x 50 3/8" x 31 3/8" Installation Space (590 mm x 1,279 mm x 795 mm) (W x L x H) • When the optional drawer is installed 23 1/4" x 50 3/8" x 36 3/4" (590 mm x 1,279 mm x 933 mm) Environmental Temperature: 50 to 86°F (10 to 30°C) Conditions Humidity: 20% to 80% RH (no condensation) Acceptable Documents See "Supported Document Types" (→P. 2-2) Acceptable Paper Stock See "Paper Requirements" (→P. 2-6) Printable Area See "Printable Area" (→P. 2-8) Scan Area See "Scan Area" (→P. 2-2) Wireless LAN Specification (MF5950dw Only) Standard Transmission Scheme Frequency Range Data Transmission Rate Communication Mode Security Wireless LAN Specification IEEE802.11g/IEEE802.11b/IEEE 802.11n* DS-SS System/OFDM System 2412 to 2472 MHz IEEE802.11g 6/9/12/18/24/36/48/54 Mbps IEEE802.11b 1/2/5.5/11 Mbps IEEE 802.11n SGI Invalidated 20 MHz : 6.5/13/19.5/26/39/52/58.5/65 Mbps SGI Validated 20 MHz : 7.2/14.4/21.7/28.9/43.3/57.8/72.2 Mbps SGI Invalidated 40 MHz : 13.5/27/40.5/81/108/121.5/135 Mbps SGI Validated 40 MHz : 15/30/45/60/90/120/150 Mbps Infrastructure Mode WEP, WPA-PSK (TKIP/AES-CCMP), WPA2-PSK (TKIP/ AES-CCMP) * WPS (Wi-Fi Protected Setup), Connection can be established by manually setting values. Copy Specifications Copy Specifications Scan Resolution • Text/Photo: 300 dpi x 600 dpi • Text/Photo (Quality), Photo, Text: 600 dpi x 600 dpi Output Resolution 600 dpi x 600 dpi Copy Ratio • Direct 1:1 ± 1.0 % • Enlargement 1:4.00, 1:2.00, 1:1.29 • Reduction 1:0.78, 1:0.64, 1:0.50, 1:0.25 • Zoom 0.25 to 4.00, 1% increments Copy Speed (Letter Plain Direct)* 35 cpm Continuous Copying Capacity Maximum 99 copies First Copy Time (Letter) 8 seconds or less * The copy speed on Letter size plain paper on one-side printing is measured during continuous copying. Copy speeds vary depending on the paper type and size, as well as the paper feeding direction. Copy speeds on smaller paper sizes may be slower. Plus, the machine may experience downtime or decrease the copy speed in the middle of a continuous copy run to adjust the temperature inside the machine or maintain the optimal print quality. Printer Specification Printer Specification Printing Method Indirect electrostatic system (On-demand fixing) Paper Capacity Multi-purpose tray: Approx. 50 sheets (16 to 23 lb Bond (60 to 89 g/m²)) Paper drawer: Approx. 250 sheets (16 to 23 lb Bond (60 to 89 g/m²)) Paper Feeder Unit PF-44 (Optional): Approx. 500 sheets (16 to 23 lb Bond (60 to 89 g/m²)) Output Tray Capacity Output tray: Approx. 150 sheets (16 to 23 lb (a fresh stack of Bond 60 to 89 g/m²))*1 Letter size paper) Sub Output tray: 1 sheet Print Speed (Letter Plain Direct)*2 35 ppm First Print Time (Letter) 6 seconds or less*3 Output Resolution Equivalent to 1200dpi x 600dpi Gradation Toner Cartridge 256 gradations See "Replacing the Toner Cartridge" (→P. 8-8) * 1 The actual paper capacity varies depending on the installation environment and paper type used. * 2 The print speed on Letter size plain paper on one-side printing is measured during continuous printing. Print speeds vary depending on the paper type and size, as well as the paper feeding direction. Print speeds on smaller paper sizes may be slower. Plus, the machine may experience downtime or decrease the print speed in the middle of a continuous print run to adjust the temperature inside the machine or maintain the optimal print quality. * 3 May vary depending on the output environment. Appendix 11-2