Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 109

• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing surface. • If the paper is wrinkled or warped, straighten it out before loading it. • Load the roll so that there is no gap between the right edge of the paper and the Roll Holder. • Depending on the paper, the roll paper may be scratched when being fed and not feed well. In this case, you must feed the paper manually after setting Paper retention settings to Release on the touch screen. Lift the release lever, advance the roll paper until its leading edge appears on platen, lower the release lever, and then proceed to the next step. However, if Paper retention settings is set to Release, automatic switching of the upper and lower rolls is not possible. Once paper feeding starts, you will need to do the following, based on the Manage remaining roll amount setting, the barcode printed on rolls, and the Media type selection method setting. (See "Keeping Track of the Amount of Roll Paper Left.") • When selecting Disable or Auto estimate in Manage remaining roll amount. ◦ When selecting Manual or Auto with confirmation in Media type selection method. A menu for selecting the media type appears on the touch screen. Operate the touch screen and select the media type to be used. ◦ When selecting Auto detect in Media type selection method. You'll see candidate for the media type you've estimated to the touch screen. After 5 seconds, the paper type of the first item is selected. If you choose a different candidate, you can use the touch screen to select the type of paper you want. ◦ When selecting Use current media type in Media type selection method. A menu for selecting the media type appears on the touch screen. After 5 seconds, the media type will be selected with the fixed media kind. • When selecting Barcodes in Manage remaining roll amount and if the barcode is printed. The type and amount of paper left is automatically detected based on the barcode printed on the roll. There is no need to specify the type and length of the paper. 109