Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 68
Loading and Printing on Rolls
View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Loading and Printing on Rolls These are the basic steps for loading and printing on rolls. Follow these steps to load and print on rolls. Note • For details on roll paper sizes and types that can be used, see "Paper Sizes" or "Paper Information List". • To wait until the ink dries after printing before cutting the roll, set Drying Time in the printer driver. (See "Specifying the Ink Drying Time for Rolls.") • Once you have used all the paper on a roll, clean the platen. If the platen inside the top cover becomes dirty, it may soil the underside of paper. (See "Cleaning Inside the Top Cover.") 1. Turn the printer on. (See "Turning the Printer On and Off.") 2. Load a roll on the Roll Holder. (See "Loading Rolls on the Roll Holder.") 68
Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow these steps to load and print on rolls.
Note
•
For details on roll paper sizes and types that can be used, see "
Paper Sizes
" or "Paper Information
•
List".
•
To wait until the ink dries after printing before cutting the roll, set Drying Time in the printer driver. (See
•
"
Specifying the Ink Drying Time for Rolls
.")
•
Once you have used all the paper on a roll, clean the platen. If the platen inside the top cover becomes
•
dirty, it may soil the underside of paper. (See "
Cleaning Inside the Top Cover
.")
1.
Turn the printer on. (See "
Turning the Printer On and Off
.")
1.
2.
Load a roll on the Roll Holder. (See "
Loading Rolls on the Roll Holder
.")
2.
68