Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 143
Cutting mode, User cut, Do you want to set to detect the leading edge of the paper?, Do not detect,
View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
5. Tap Cutting mode. 6. Tap User cut. 7. When Do you want to set to detect the leading edge of the paper? is displayed, select Do not detect. Note • If you set the detection of paper leading edge to Do not detect, a margin of about 4.0 inches (10 cm) is created at the paper leading edge when printing starts. • When the detection of paper leading edge is set to Do not detect, printing will start at the position at which the roll was set for the first printing after replacing a roll. Thus, the margin of the paper leading edge will enlarge. (See "Loading the Upper Roll on the Printer.") 8. Tap Back button twice to display roll paper screen. 9. Tap Feed/cut. 10. Tap or touch Advance or Rewind and align paper's leading edge with position (A). 11. Print the job. The printer stops advancing the paper after printing. 12. Tap Advance paper. Roll paper is fed to the specified cut position and then automatically stopped. 143