Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 243

Printer name XXXXXXXXXXXXXXX (up to 15 characters) Bonjour service name XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX XXXXXXXXXXXXX (up to 52 characters) ("XX" represents alphanumeric characters.) To change the setting, tap Settings. ◦ Enable/disable Wi-Fi Select Enable to wirelessly connect via wireless router. ◦ Wi-Fi setup Select how to setup Wi-Fi. Easy wireless connect Select if you specify the settings of the access point information to the printer directly from a device (e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions of the connecting device for the setup procedure. Manual connect Select when you perform settings for Wi-Fi manually using the operation panel of the printer. WPS (Push button method) Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected Setup (WPS) push button method. Follow the on-screen instructions during setup. Other connection types Advanced setup Select when you perform settings for Wi-Fi manually. You can specify multiple WEP keys. WPS (PIN code method) Select when you perform settings for Wi-Fi using a wireless router supporting a Wi-Fi Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup. Note • By tapping Advanced, you can set LAN in detail. For the items that can be set, see the following. Advanced • Wireless Direct The following setting information on the Wireless Direct connection is displayed. (Some items are not displayed depending on printer settings.) Items Connection Network name (SSID) Password Setting Enable / Disable DIRECT-XXXX-TX-NNNN※1 XXXXXXXXXX (10 characters) 243