Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 379
Connecting Smartphone/Tablet to Printer via Wireless Router
View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 379 highlights
Connecting Smartphone/Tablet to Printer via Wireless Router You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below. • Wi-Fi connection (connecting devices via a wireless router) • Wireless Direct connection (connecting devices without using a wireless router) This section describes Wi-Fi connection via a wireless router. Follow the procedure below to connect via a wireless router. 1. Enable Printer's Wi-Fi connection 2. Connect Smartphones and Tablets to the Printer Important • Check the usage restrictions and change the printer LAN setting. Restrictions • The administrator password is required to change settings if it is enabled for changing settings using the operation panel. Enable Printer's Wi-Fi connection 1. Flick HOME screen and tap LAN settings. Home Screen Menu Composition 2. Tap Wi-Fi. 3. Check Enable is displayed in Connection. If Connection is displayed as Disable, follow the steps below to enable Wi-Fi. 1. Tap Settings. 2. Tap Enable/disable Wi-Fi. 3. Tap Enable. The printer's Wi-Fi is enabled and you can connect the Wi-Fi you connected previously. Connect Smartphones and Tablets to the Printer For Android device For iOS device For Android device 1. Open "Settings" menu on your device. 379