Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 12

Network Settings and Common Problems 749 Problems Regarding Paper 750 Remove Jammed Roll Paper 751 Remove a Jammed Sheet 755 Roll paper cannot be inserted into the Paper Feed Slot 758 Paper is not fed automatically 759 Roll Paper Is not Switched Automatically 760 Roll Paper Is not Fed Automatically 761 Paper Source Does Not Switch When Roll Paper Is Used Up 762 Roll Paper Remains/Lacks under Quantity Management 763 Cannot load sheets 764 Paper is not cut straight 765 Paper is not cut 767 Cutter Blade Does Not Work While Cutting Is in Progress 768 The size of clear film cannot be detected 769 Margins are wide 770 When printing on roll paper, the printed surface becomes scratched 771 Printing Does Not Start 772 Printer Suddenly Stopped Working for Some Reason 773 The Data lamp on the Operation Panel does not light up 778 The printer does not respond even if print jobs are sent 779 "Preparing the ink system." is displayed 780 "Agitating the ink" is displayed 781 Message Is Displayed and Borderless Printing Fails 782 The Printer Stops During a Print Job 784 Printing stops and an error message is displayed 785 The printer ejects blank, unprinted paper 786 Problems with the Printing Quality 787 Printing is faint 788 Paper rubs against the Print Head 790 The edges of the paper are dirty 792 The surface of the paper is dirty 795 The back side of the paper is dirty 796 Immediately after borderless printing, the trailing edge margin is soiled during regular printing. . . . . . 798 Printed colors are inaccurate 799 Banding in different colors occurs 801