Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 786
The printer ejects blank, unprinted paper
View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 786 highlights
The printer ejects blank, unprinted paper Check 1 The leading edge of the roll paper may have been trimmed. The leading edge of the roll paper may be trimmed if Trim edge first is not set to Off or Manual in the touch screen menu. Cutting the Leading Edge of Roll Paper Automatically Check 2 Is the Print head nozzle blocked? Print a nozzle check pattern to check the Print head status. Checking for Nozzle Clogging Check 3 Is the correct printer driver selected? Print again using the correct printer driver for your printer. Check 4 When you print data including HP RTL command, check the settings below in the touch screen menu. • Set Auto rotation to OFF. • If Rotate is set to 90 degrees, select 0 degrees and start printing. Menu Structure If none of the above apply, there may be a printer malfunction. Contact your Canon dealer for assistance. 786