Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 317

Detect image size Specifies the output object area method that provides efficient printing, which avoids parts of images being cut off when a HP-GL/2 data does not include image drawing range information. This setting item is displayed by tapping in the following order. Printer settings > Print settings > HP-GL/2 print settings > Processing options • OFF (Initial setting) ◦ If image drawing range information is included in HP-GL/2 data: The output object area is in accordance with the image drawing range information. The origin specified by the image drawing range information is drawn in the upper-left corner of the paper. ◦ If image drawing range information is not included in HP-GL/2 data: The output object area uses the printer's maximum roll paper width as the horizontal dimension and 1.5 times the maximum roll paper width as the vertical dimension. Even though the particular page included in multiple pages does not contain a command which specifies the image drawing range, note that the image drawing range specified for the just previous page is applied if previous pages contain the command. • Command priority ◦ If image drawing range information is included in HP-GL/2 data: The output object area is in accordance with the image drawing range information. The origin specified by the image drawing range information is drawn in the upper-left corner of the paper. ◦ If image drawing range information is not included in HP-GL/2 data: Applies the minimum image range detected as the output object area. The upper left corner of the detected minimum image range is drawn in the upper left corner of the paper. • Detected size Applies the minimum image range detected as the output object area. Image drawing range information included in HP-GL/2 data is not used. The upper left corner of the detected minimum image range is drawn in the upper left corner of the paper. Note • If part of an image is being cut off or if an image is out of alignment, try using each of the settings in the following sequence: OFF, Command priority, Detected size. 317