Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 180
Stacking Printed Materials with ARCH D Portrait or A1 Portrait Position
![]() |
View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Stacking Printed Materials with ARCH D Portrait or A1 Portrait (Position 3) • Supported paper size ◦ 24"x36" (ARCH D) 24.00 x 36.00 inches (609.6 x 914.4 mm) ◦ A1 23.39 x 33.11 inches (594.0 x 841.0 mm) Pull down the rod (fixed) (E) toward you. Set the rod (adjustable) in the groove (B) at the upper of the stand, and then set the flapper (A) vertically so that the stacker configuration is the Position 3. Then attach the paper stopper (C) stored in the accessory pocket of the stand to the lower of the second part (D) from the right side of the flapper. 180
![](/manual_guide/products/canon-imageprograf-tx3100-imageprograf-tx4100-tx3100-tx2100-tx5410-tx5310-tx5210-series-user-manual-c030371/180.png)
Stacking Printed Materials with ARCH D Portrait or A1 Portrait (Position
3)
•
Supported paper size
•
◦
24"x36" (ARCH D)
24.00 x 36.00 inches (609.6 x 914.4 mm)
◦
A1
23.39 x 33.11 inches (594.0 x 841.0 mm)
Pull down the rod (fixed) (E) toward you. Set the rod (adjustable) in the groove (B) at the upper of the
stand, and then set the flapper (A) vertically so that the stacker configuration is the Position 3. Then attach
the paper stopper (C) stored in the accessory pocket of the stand to the lower of the second part (D) from
the right side of the flapper.
180