Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 350
Enable HTTPS redirection
![]() |
View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 350 highlights
Selecting Enable HTTPS redirection redirects the communication using CHMP to encrypted communication. Note To use CHMP for encrypted communication, you need to register the printer's root certificate to your computer. Registering Printer's Root Certificate to Local Computer for SSL Communication CHMP is a Canon proprietary protocol. ◦ Network interface settings To connect to a hub that supports STP, select Enable. Selecting Enable perform the intermittent data reception when connecting to the network. ◦ DRX settings Selecting Enable perform the intermittent data reception when connecting to the network. ◦ IP filtering Allows or denies access for specific IP addresses. Settings for both IPv4 and IPv6 addresses can be specified. Important If the device address for administrator has been set to rejection by mistake, tap on the operation panel, LAN settings > Wi-Fi/Wireless Direct/Wired LAN > Settings > Advanced setup > Reset LAN settings, and initialize network information of the printer. After resetting, perform setup again as necessary. ◦ MAC address filtering settings Allows or denies access for specific MAC addresses. Important If the device address for administrator has been set to rejection by mistake, tap on the operation panel, LAN settings > Wi-Fi/Wireless Direct/Wired LAN > Settings > Advanced setup > Reset LAN settings, and initialize network information of the printer. After resetting, perform setup again as necessary. ◦ Reset LAN settings Initializes the network settings on the printer. After resetting, perform setup again as necessary. 350
![](/manual_guide/products/canon-imageprograf-tx3100-imageprograf-tx4100-tx3100-tx2100-tx5410-tx5310-tx5210-series-user-manual-c030371/350.png)