Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 426

Manual Adjustment to Straighten Lines and Colors If printed vertical lines are warped or colors are out of alignment, execute Print Head Alignment and adjust the print head position. Normally, execute Auto (standard). Automatic Adjustment to Straighten Lines and Colors However, when printing on special paper or if printing is not improved after Auto (advanced), try Manual. Manual adjustment requires you to examine the printed test pattern and enter an adjustment value. Important • Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type of paper as you will use for printing. Paper to Prepare When using rolls An unused roll at least 10.00 in. (254.0 mm) wide When using sheets Four sheets of unused paper, A4/Letter size or larger (or a sheet when using A2 or larger) Perform adjustment as follows. 1. Load paper. Loading the Upper Roll on the Printer Loading the Lower Roll on the Roll Unit (Option) Loading Sheets in the Printer Important • Always make sure the loaded paper matches the type of paper specified on the printer. Adjustment cannot be completed correctly unless the loaded paper matches the settings. 2. Tap Maintenance on HOME screen. Home Screen Menu Composition The Maintenance screen appears. 3. Tap Print Head Alignment. 4. Tap Manual. A confirmation message appears. 426