Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 172

Printed materials other than A2 portrait Paper curls an extreme amount due to paper characteristics and printing environment If there is not much paper remaining on the roll, and the paper curls an extreme amount Moving Printed Materials to Next Work Area Immediately (Position 5) You can use the basket in the following position when moving the printed materials to the next work area immediately. Move the basket rod (cord side) to the upper of the two pairs of attachment locations on the front of the printer, extend the basket arm as far as possible in the angle shown. Next, adjust the length so that the basket is pulled into this position. Important • Be extra careful when using paper that tends to curl or is damaged easily in this position. • With some types of paper, the leading edge may curl or bend during ejection. In this case, straighten out the paper. Printed documents may be damaged if the paper is curled or bent. • Depending on the paper, the paper may be caught between the output guide and the basket when being ejected. In this case, fix the paper that is caught. If the paper is caught, printed documents may be damaged. 172