Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 738

Remove a Jammed Sheet Roll paper cannot be inserted into the Paper Feed Slot Paper is not fed automatically Roll Paper Is not Switched Automatically Roll Paper Is not Fed Automatically Paper Source Does Not Switch When Roll Paper Is Used Up Roll Paper Remains/Lacks under Quantity Management Cannot load sheets Paper is not cut straight Paper is not cut Cutter Blade Does Not Work While Cutting Is in Progress The size of clear film cannot be detected Margins are wide When printing on roll paper, the printed surface becomes scratched Printing Does Not Start Printer Suddenly Stopped Working for Some Reason The Data lamp on the Operation Panel does not light up The printer does not respond even if print jobs are sent "Preparing the ink system." is displayed "Agitating the ink" is displayed Message Is Displayed and Borderless Printing Fails The Printer Stops During a Print Job Printing stops and an error message is displayed The printer ejects blank, unprinted paper Cannot Print over Network Cannot Connect Printer to Network Cannot Print over TCP/IP Network Cannot Print over Bonjour networks Cannot Find Printer on Network Cannot Find Printer on Check Printer Settings Screen (Windows) Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen Searching Printer by IP Address or Host Name During Setup Cannot Find Printer while Using Wi-Fi Cannot Find Printer while Using Wired LAN Cannot Print Using AirPrint Installation Problems Removing Printer Software Taking Time to Setup Process (Windows) Failed to Printer Driver Installation (Windows) HP-GL/2 problems With HP-GL/2, printing is misaligned Lines or images are missing in printed HP-GL/2 jobs Lines are printed too thick or thin in HP-GL/2 print jobs 738