Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 88
Paper Sizes
View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Paper Sizes Rolls Rolls that meet the following conditions are supported. • Outer diameter is 6.7 inches (170 mm) or less • Inner diameter of paper core: 2 or 3 inches • Printing side out Roll Paper Width TX-4100 / TX-5410 : 44.02 in. (1118.0 mm) to 6.00 in. (152.4 mm) TX-3100 / TX-5310 : 36.11 in. (917.0 mm) to 6.00 in. (152.4 mm) TX-2100 / TX-5210 : 24.02 in. (610.0 mm) to 6.00 in. (152.4 mm) Roll paper width recommended for borderless printing(*1,*2) 44 in Roll (1117.6mm) 42 in Roll (1066.8mm) B0/B1 Roll (1030.0mm) 36 in Roll (914.4mm) A0/A1 Roll (841.0mm) B1/B2 Roll (728.0mm) 24 in Roll (609.6mm) A1/A2 Roll (594.0mm) B2/B3 Roll (515.0mm) 17 in Roll (431.8mm) 14 in Roll (355.6mm) 10 in Roll (254.0mm) Minimum Paper Length 4.00 in. (101.6 mm) Excludes cloth/canvas paper. Maximum Printable Length 59 feet (18 m) depends on the OS and application. Thickness 3 mil (0.07 mm) to 31 mil (0.8 mm) *1:Borderless printing may not be available depending on the media type. For details on media types that can be used for borderless printing, see "Paper Information List." *2:You can perform borderless printing without specifying Roll paper width recommended for it. As opposed to standard borderless printing, there will be a small margin on the left and right because the paper width is set a little bit smaller than the width of the document. Sheets Sheets of the following sizes are supported. Sheet Width TX-4100 / TX-5410 : 44.02 in. (1118.0 mm) to 6.00 in. (152.4 mm) 88