Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 843
Lines are printed too thick or thin in HP-GL/2 print jobs
![]() |
View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 843 highlights
Lines are printed too thick or thin in HP-GL/2 print jobs Check 1 Check the Width setting in Pen setup menu. Select Pen setup, then select Define palette, and change the Width setting of each pen in each palette. Print settings Check 2 Check the Width correction setting. Change the Width correction setting in the touch screen menu. Print settings Check 3 Is Adjust faint lines set to OFF? If fine lines are printed faintly, setting Adjust faint lines to ON will print the lines more distinctly. Print settings 843
![](/manual_guide/products/canon-imageprograf-tx3100-imageprograf-tx4100-tx3100-tx2100-tx5410-tx5310-tx5210-series-user-manual-c030371/843.png)
Lines are printed too thick or thin in HP-GL/2 print jobs
Check 1
Check the
Width
setting in
Pen setup
menu.
Select
Pen setup
, then select
Define palette
, and change the
Width
setting of each pen in each palette.
Print settings
Check 2
Check the
Width correction
setting.
Change the
Width correction
setting in the touch screen menu.
Print settings
Check 3
Is
Adjust faint lines
set to
OFF
?
If fine lines are printed faintly, setting
Adjust faint lines
to
ON
will print the lines more distinctly.
Print settings
843