Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 751
Remove Jammed Roll Paper
![]() |
View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 751 highlights
Remove Jammed Roll Paper If roll paper jams, follow the steps below to remove jams. Note • If "The paper is jammed. Lift the release lever and remove the paper." appears on the touch screen, Step 1 and Step 9 can be skipped. 1. Turn off the power to the printer. Turning the Printer On and Off 2. Open the top cover. Note • If the roll paper is very curled or the leading edge of the roll paper blocks the Carriage, setting the cutting method for the roll paper to User cut and leading edge detection to Do not detect may stop the paper from blocking the carriage. Specifying the Cutting Method for Rolls 3. If the Carriage is out, move the Carriage to the left or right side, away from the jammed paper. 751
![](/manual_guide/products/canon-imageprograf-tx3100-imageprograf-tx4100-tx3100-tx2100-tx5410-tx5310-tx5210-series-user-manual-c030371/751.png)
Remove Jammed Roll Paper
If roll paper jams, follow the steps below to remove jams.
Note
•
If "
The paper is jammed. Lift the release lever and remove the paper.
" appears on the touch screen,
Step 1 and Step 9 can be skipped.
1.
Turn off the power to the printer.
1.
Turning the Printer On and Off
2.
Open the top cover.
2.
Note
•
If the roll paper is very curled or the leading edge of the roll paper blocks the Carriage, setting the
•
cutting method for the roll paper to
User cut
and leading edge detection to
Do not detect
may
stop the paper from blocking the carriage.
Specifying the Cutting Method for Rolls
3.
If the Carriage is out, move the Carriage to the left or right side, away from the jammed
3.
paper.
751