Canon imagePROGRAF TX-4100 MFP Z36 imagePROGRAF TX-4100 TX-3100 TX-2100 TX-541 - Page 389
Printing Network Settings
View all Canon imagePROGRAF TX-4100 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 389 highlights
Printing Network Settings Use the operation panel to print the printer's current network settings. Important • The network settings printout contains important information about your network. Handle it with care. 1. Check that printer is turned on. 2. Load plain paper. Loading the Upper Roll on the Printer Loading the Lower Roll on the Roll Unit (Option) If you use sheets, prepare at least 11 sheets (A4 or Letter-sized). Loading Sheets in the Printer 3. Select Printer settings on HOME screen. 4. Select LAN settings. 5. Select Print details. 6. Select Yes on displayed screen. 7. Select Yes or No on displayed screen. The printer starts printing network settings information. Note • You can also print the printer's network settings. Select Printer settings > Test print > Print LAN details > Yes > Yes. The printed network settings information is as follows: (Some setting values are not displayed depending on the printer settings.) Item Description Setting LAN Setting Basic setting information - Basic Info IPv4 setting information (Wired LAN) - LAN Interface Mode Current interface Wired LAN/Wireless LAN(Infra)/Wireless LAN(AP)/Wireless(Direct connection)/Disabled Link Active Operation status Active/Inactive 389