Canon imagePROGRAF iPF770 MFP M40 User Guide - Page 324

Handling and Use of Paper Loading Rolls in the Printer iPF770 • Do not force the Roll Holder into the printer with the right and left ends reversed. This may damage the Caution printer and Roll Holder. • Do not release the flanges until the holder is loaded in the Roll Holder Slot. • Be careful not to pinch your fingers between the Roll Loading Slots (b) and the Roll Holder shaft (c) when loading rolls. 6 Insert the edge of the roll in the Paper Feed Slot (a) and advance the roll until you hear the feed tone. a a • Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the Important printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing surface. • If the paper is wrinkled or warped, straighten it out before loading it. • Load paper straight so it is not fed askew. Handling rolls 7 Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and the barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.") ➔P.331 ManageRemainRoll Barcodes Printer Operation After the Paper is Fed Off Printed A menu for selection of the type of paper is automatically shown on the Display Screen. Not prin- Press ▲ or ▼ to select the type of paper, and then press the OK button. ted On Printed The type and amount of paper left is automatically detected based on the barcode printed on the roll. There is no need to specify the type and length of the paper. Not printed A menu for selection of the paper type and length is automatically shown on the Display Screen. Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button. • For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper Ref- 324 Note erence Guide.") ➔P.313 User's Guide