Canon imagePROGRAF iPF770 MFP M40 User Guide - Page 424
Rep.P.head Print, Print Job Log
View all Canon imagePROGRAF iPF770 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 424 highlights
Menu Settings System Setup Setting Item Keep Paper Size Control Panel Printer Menu TrimEdge Reload Rep.P.head Print Nozzle Check Use USB Use Ethernet Use RemoteUI Reset PaprSetngs Show Job Log 424 Prep.MovePrinter Description, Instructions iPF770 Choose Off to give priority to margin settings. The larger value is used if the margin specified in the printer driver does not match the margin in the printer menu. Specify whether to trim the leading edge of the currently retracted roll when the roll is advanced. Cut the edge if you are concerned about any marks left on the roll when the roll is left in the retracted position. Specify On to have rolls cut when printing begins after Sleep mode or when the power is restored. Selecting Automatic will trim the edge when the roll has been in the retracted position for two days or more. Choose On to have the printer automatically execute the Advanced Adj. operations after you replace the Printhead. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.480 In Frequency, specify the timing for automatic checks of nozzle clogging. Choose Standard to have the printer adjust the timing for checks based on the frequency of nozzle use. Choose 1 page to check once per page. Choose 10 pages to check once per 10 pages. Choose Off to not execute check. If On is selected in Warning, a warning may be displayed on the Control Panel depending on the result of the nozzle check. When Off is selected, the device can no longer be accessed via USB. When Off is selected, the device can no longer be accessed via Ethernet. Choosing Off prohibits access from RemoteUI. Settings can only be configured from the control panel. Restores settings that you have changed with Media Configuration Tool to the default values. Selecting Off prevents display of the log in Job Menu > Job Log. Additionally, the log is not printed if you choose Job Menu > Print Job Log. Note that because job logs are not collected, the Status Monitor accounting functions will not work correctly. Select this option when transferring the printer to another location. Follow the instructions displayed to complete the required procedure. (See "Preparing to Transfer the Printer.") ➔P.518 Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. User's Guide