Canon imagePROGRAF iPF770 MFP M40 User Guide - Page 534
Roll paper cannot be inserted into the Paper Feed Slot, Cannot load sheets, Paper is not cut neatly
View all Canon imagePROGRAF iPF770 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 534 highlights
Roll paper cannot be inserted into the Paper Feed Slot 8 Pull the Release Lever forward. iPF770 Roll paper cannot be inserted into the Paper Feed Slot Cause The roll paper is warped. Paper is jammed by the paper feed slot. The paper source selection is incorrect. Corrective Action Straighten out curls and reload the roll. Remove the jammed paper. (See "Clearing Jammed Roll Paper.") ➔P.527 (See "Clearing a Jammed Sheet.") ➔P.530 Press the Load button and select the paper source. Troubleshooting Cannot load sheets Cause Corrective Action The paper source selection is incorrect. Press the Load button and select the paper source. Problems Regarding Paper Paper is not cut neatly Cause The paper is bent or curled at the cut position. Paper rises by the ends of the cut position before it is cut. You are using paper that cannot be cut with the Cutter Unit. Cut Speed is not configured correctly in the Control Panel menu. During cutting, printed documents fall out at an angle. Corrective Action Straighten out any curling by the edges of the paper. Reload the paper correctly. Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a cutting tool to cut the roll after printing. (See "Specifying the Cutting Method for Rolls.") ➔P.333 Change the Cut Speed setting in the Control Panel menu. (See "Menu Structure.") ➔P.410 In the Control Panel menu, set Cutting Mode to Eject. Hold documents after printing, as they are cut. (See "Specifying the Cutting Method for Rolls.") ➔P.333 Paper is not cut Cause Corrective Action In the printer driver, No or Print Cut Guideline is specified in Specify Yes in Automatic Cutting in the printer driver. Automatic Cutting. (See "Page Setup Sheet (Windows).") ➔P.159 534 (See "Paper Detailed Settings Dialog Box (Mac OS).") ➔P.256 In the Control Panel menu, Cutting Mode is set to Eject or If the Cutting Mode is Eject, press the Cut button to cut the paper. Manual. If the Cutting Mode is Manual, cut rolls with scissors or the like. (See "Specifying the Cutting Method for Rolls.") ➔P.333 User's Guide