Canon imagePROGRAF iPF770 MFP M40 User Guide - Page 557
The paper is too small., Replace paper with A4/LTR vertical or larger
View all Canon imagePROGRAF iPF770 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 557 highlights
iPF770 The paper is too small. Cause When Detect Mismatch in the Control Panel menu is set to Pause, the type of paper loaded does not match the type specified in the printer driver. When Detect Mismatch in the Control Panel menu is set to Warning, the type of paper loaded does not match the type specified in the printer driver. Corrective Action Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may cause paper jams and affect the printing quality. You can continue to print, but note that this error may cause paper jams or problems in the printing results. The paper is too small. Cause When Detect Mismatch in the Control Panel menu is set to Pause, paper smaller than the size specified in the printer driver is loaded. When Detect Mismatch in the Control Panel menu is set to Warning, paper smaller than the size specified in the printer driver is loaded. Corrective Action Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may cause paper jams and affect the printing quality. Adjust the paper size setting in the printer driver to match the size loaded in the printer as follows. 1. Press ▲ or ▼ to select Stop Printing, and then press the OK button. 2. Change the paper size setting in the printer driver to the size loaded in the print- er and try printing again. Replace the loaded paper with paper of a size that matches the size setting in the printer driver as follows. 1. Press ▲ or ▼ to select Change Paper, and then press the OK button to stop printing. 2. Replace the loaded paper to match the settings in the printer driver and try print- ing again. (See "Loading and Printing on Rolls.") ➔P.16 (See "Loading and Printing on Sheets.") ➔P.18 You can continue to print, but note that this error may cause problems in the printing results. The paper is too small. Error Message Messages regarding paper "Replace paper with A4/LTR (vertical) or larger" Cause Corrective Action The loaded paper is too small. Replace the paper with paper of A4/Letter (vertical) size or larger as follows. 1. Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper. (See "Removing Sheets.") ➔P.344 2. Switch to paper A4/Letter (vertical) or larger. (See "Loading and Printing on Sheets.") ➔P.18 The printer will resume printing. Press ▲ or ▼ to select Stop Printing, and then press the OK button. "Replace roll with 10 in. wide or larger roll." Cause Corrective Action The loaded paper is too small. Replace the roll with a roll 10 inches in width or larger as follows. 557 1. Press ▲ or ▼ to select Change Paper, and then press the OK button. (See "Removing the Roll from the Printer.") ➔P.327 (See "Removing the Roll Holder from Rolls.") ➔P.329 2. Replace the roll with a roll 10 inches wide or larger. (See "Attaching the Roll Holder to Rolls.") ➔P.320 (See "Loading Rolls in the Printer.") ➔P.322 User's Guide